High Security fences

Betafence Securifor Super 10

Name: Pur-ait Oy
Address: Lyhtytie 24 B, Helsinki, 00750, FI
Telephone: 09 350 9400

SECURIFOR SUPER 10 is a Betafence high security mesh fence whose 10 mm vertical wire offers the highest cutting resistance on the market. The LPS 1175 B3 certification is third-party tested, and the fence withstands a tool-assisted attempt to break in for at least three minutes. Available in heights of 2000–4000 mm for protecting data centres, energy facilities and critical infrastructure.

Request a quote 09 350 9400

Betafence Securifor Super 10, High security mesh fence with 10 mm vertical wire. Mesh 12.7×76.2 mm, height 200

Technical data

Specifications

Mesh size 12.7×76.2 mm

Vertical wire 10 mm

Height 2000–4000 mm

Certificate LPS 1175 B3

Manufacturer Betafence

Why choose this

Features

10 mm vertical wire with very high cutting resistance
LPS 1175 B3 certified
Anti-climb thanks to the small mesh
Height up to 4000 mm

Suitability

Applications

Data centresEnergy facilitiesCritical infrastructureDefence

Products in the same range

High Security

358 High Security Fence

Level 3 high security welded wire panel for critical infrastructure. Mesh 76.2×12.7 mm, wire diameter 4–6 mm, heights 2000–6000 mm. Galvanised steel with RAL powder coating.

Betafence Securifor 2D

High security mesh fence. Mesh 12.7×76.2 mm, wire 4/6 mm, height 2000–6000 mm. LPS 1175 A1 certified.

Betafence Securifor 3D

High security mesh fence. Mesh 12.7×76.2 mm, wire 4 mm, height 2000–3000 mm. Anti-climb and anti-cut.

Betafence Securifor 4D

Exceptionally rigid high security mesh fence with alternating wires. Mesh 12.7×76.2 mm, wire 4 mm, height 2000–3000 mm. Available with LPS 1175 A1 rating.

Betafence Securifor Defender

Galvanised and polyester-coated high security fence system. Mesh 76.2×12.7 mm, wire 4 mm. ASTM 2871-15 certified.

Betafence Blokad Securifor Super 10

Multi-threat protection with anti-climb, anti-cut and vehicle impact protection in one fence. Height 2000–4000 mm. LPS 1175 B3 and M30 P1 certified.

Palifor

Anti-climb palisade fence with a modular structure. Height 2400–3000 mm. LPS 1175 B3 and anti-climb certified.

Blokade Palifor

Crash-rated palisade fence. Stops a 7200 kg vehicle at 48 km/h. Height 2400–3000 mm. ISO 22343 and LPS 1175 B3 certified.

ISO 22343

Crash-Rated Gates

Pur-ait's crash-rated gate as a high-speed bi-folding gate or sliding gate for critical infrastructure. ISO 22343 certified. Stops a vehicle and is suitable for data centres, power plants and sites covered by the CER Directive.

SECURIFOR SUPER 10 for protecting critical infrastructure

SECURIFOR SUPER 10 is the highest performance class in the SECURIFOR range, designed for sites where an ordinary industrial fence is not enough. The 10 mm vertical wire raises cutting resistance to a level that ordinary hand tools, such as bolt cutters, lever cutters or angle grinders, cannot quickly overcome. The 12.7×76.2 mm mesh prevents fingers and tools from being pushed through, which makes climbing and cutting practically impossible without heavy industrial tools. LPS 1175 B3 certification means that an independent testing body (Loss Prevention Certification Board) has found the fence to withstand an attack with professional break-in tools for at least three minutes.

LPS 1175 B3 or a lower protection class?

The LPS 1175 standard is divided into classes A1–D5, of which B3 represents a high level of protection. Class B3 tests the fence's resistance to tools a professional burglar typically uses, such as battery-powered angle grinders, hydraulic cutters and hammer drills. The lower classes (A1, B1) are enough for sites where the threat is an opportunistic intruder without special tools. The B3 certification of SECURIFOR SUPER 10 is an essential selection criterion when the site's risk analysis requires documented performance, for example at the request of an insurer or an authority. An ordinary 'high security' marketing claim without LPS certification is not comparable.

Technical features and dimensions

SECURIFOR SUPER 10 has a mesh size of 12.7×76.2 mm and a vertical wire diameter of 10 mm. The anti-climb structure is based on the small mesh. A foot or hand does not fit through, and there is no grip for climbing. Height options range from 2000 mm all the way to 4000 mm, allowing a tall perimeter without separate add-on structures. Posts and fixings are always sized for the site. Wind load, ground conditions and any accessories (barbed wire, detectors, cameras) affect the design of the foundations and fixings. Pur-ait supplies a complete solution from design to installation.

Typical applications

SECURIFOR SUPER 10 is suitable for sites where the consequences of intrusion are serious. These include data centres, where physical protection of the servers is critical, energy facilities and electrical substations, where sabotage can cause widespread disruption, and defence sites and critical infrastructure, where regulations require a certified level of protection. The fence can work as part of a multi-layered security system together with surveillance cameras, motion detectors and access control. LPS 1175 B3 certification makes security audits and obtaining insurance easier for the site.

SECURIFOR SUPER 10 price and quote request

The price of SECURIFOR SUPER 10 depends on the scope of the site, the height and the installation conditions. An LPS 1175 B3 certified fence is an investment that pays for itself through lower insurance premiums and a documented level of protection. Pur-ait is the official Betafence partner in Finland and supplies SECURIFOR products as supply only or as turnkey installation. Request a site-specific quote and we will size the solution to your risk analysis and requirements.

Betafence Securifor Super 10, FAQ

What does LPS 1175 B3 certification mean in practice?

LPS 1175 B3 means that an independent testing body has proven that the fence withstands an attack with professional break-in tools, such as an angle grinder, for at least three minutes. The certification is documented, so it can be used to meet insurance and regulatory requirements.

What is the difference between SECURIFOR SUPER 10 and an ordinary mesh fence?

An ordinary mesh fence withstands a casual intrusion attempt, but not a professional burglar. The 10 mm vertical wire and LPS 1175 B3 certification of SECURIFOR SUPER 10 ensure that the fence also resists industrial tools for several minutes.

How tall can SECURIFOR SUPER 10 be?

The fence is available in heights of 2000–4000 mm. The tallest 4000 mm version suits sites where climbing needs to be prevented without a separate barbed wire extension.

Is SECURIFOR SUPER 10 suitable for data centre perimeter security?

Yes. Data centres are a typical application, because LPS 1175 B3 certification meets the physical security requirements of several data centre standards and makes audits easier.

How do I get a quote for a SECURIFOR SUPER 10 fence?

Request a quote from Pur-ait. We need to know the area of the site, the required height and any accessories. We provide a site-specific quote for materials or full installation.

Right for your site?

Tell us about your site and requirements, and we will specify the right solution and send you a quote.

Request a quote 09 350 9400