Betafence Securifor 3D
Betafence Securifor 3D is a high security mesh fence whose three-dimensional panel stiffening and 12.7×76.2 mm mesh make climbing and cutting practically impossible. The 4 mm wire and galvanised construction last for decades on the outer perimeter of critical infrastructure. Available in heights of 2000–3000 mm. Pur-ait is the official Betafence partner in Finland.
Technical data
Specifications
Why choose this
Features
- Anti-climb, the small mesh prevents climbing
- Anti-cut, resists cutting tools
- Height 2000–3000 mm
Suitability
Applications
Products in the same range
High Security
358 High Security Fence
Level 3 high security welded wire panel for critical infrastructure. Mesh 76.2×12.7 mm, wire diameter 4–6 mm, heights 2000–6000 mm. Galvanised steel with RAL powder coating.
Read more →
Betafence Securifor 2D
High security mesh fence. Mesh 12.7×76.2 mm, wire 4/6 mm, height 2000–6000 mm. LPS 1175 A1 certified.
Read more →
Betafence Securifor 4D
Exceptionally rigid high security mesh fence with alternating wires. Mesh 12.7×76.2 mm, wire 4 mm, height 2000–3000 mm. Available with LPS 1175 A1 rating.
Read more →
Betafence Securifor Defender
Galvanised and polyester-coated high security fence system. Mesh 76.2×12.7 mm, wire 4 mm. ASTM 2871-15 certified.
Read more →
Betafence Securifor Super 10
High security mesh fence with 10 mm vertical wire. Mesh 12.7×76.2 mm, height 2000–4000 mm. LPS 1175 B3 certified.
Read more →
Betafence Blokad Securifor Super 10
Multi-threat protection with anti-climb, anti-cut and vehicle impact protection in one fence. Height 2000–4000 mm. LPS 1175 B3 and M30 P1 certified.
Read more →
Palifor
Anti-climb palisade fence with a modular structure. Height 2400–3000 mm. LPS 1175 B3 and anti-climb certified.
Read more →
Blokade Palifor
Crash-rated palisade fence. Stops a 7200 kg vehicle at 48 km/h. Height 2400–3000 mm. ISO 22343 and LPS 1175 B3 certified.
Read more →
ISO 22343 Crash-Rated Gates
Pur-ait's crash-rated gate as a high-speed bi-folding gate or sliding gate for critical infrastructure. ISO 22343 certified. Stops a vehicle and is suitable for data centres, power plants and sites covered by the CER Directive.
Read more →SECURIFOR 3D for protecting critical infrastructure
SECURIFOR 3D is a mesh fence from the Betafence high security range that combines a small mesh with a three-dimensional panel structure. The 12.7×76.2 mm mesh eliminates hand and foot holds. There is no room for fingers or the tip of a foot, which makes climbing very difficult without aids. The three-dimensional bends increase the longitudinal stiffness of the panel and prevent the structure from bending under pressure. The 4 mm galvanised steel wire resists cutting tools effectively, because the small mesh leaves no correct angle at which to position a tool. Typical sites include energy facilities, electrical substations, water utilities and other critical infrastructure where the perimeter must withstand organised intrusion attempts.
SECURIFOR 3D or SECURIFOR 2D?
Both use the same 12.7×76.2 mm mesh, so their anti-climb and anti-cut properties are comparable. The wire diameter differs, 4/6 mm in the 2D and 4 mm in the 3D. The difference lies in the structure. SECURIFOR 2D is a flat panel, whereas the 3D has vertical stiffening ribs bent into the panel. The three-dimensional structure increases the mechanical strength of the panel and makes it harder to bend or break, for example with a vehicle. The choice depends on the site's threat assessment. The 2D is enough for most industrial sites, while the 3D suits sites that require higher physical resistance or where certification requirements call for a stiffer structure.
Technical features and standards
SECURIFOR 3D has a mesh size of 12.7×76.2 mm and a wire diameter of 4 mm. The height range is 2000–3000 mm, which covers typical perimeter security requirements at energy facilities and industrial sites. The panel is galvanised and powder-coated, protecting it from corrosion for decades. It is installed on steel posts with concealed fixings so that the bolts cannot be undone from the outside. The SECURIFOR range is designed for LPS 1175 certification, and the 3D model can achieve higher performance classes than the 2D version.
Typical applications
SECURIFOR 3D is suitable for sites that need verified protection against forced entry. Applications include energy facilities and electrical substations. Water utilities and wastewater treatment plants are part of critical infrastructure, where perimeter security is one element of overall security. On industrial sites the 3D model is used especially where the site holds valuable equipment, hazardous substances or high-risk operations. At logistics centres and storage areas the 3D structure can be justified if the site is located in a high-crime area.
SECURIFOR 3D price and delivery time
The price of SECURIFOR 3D depends on the site. The length and height of the fence, the gate solutions and the installation conditions all affect the total cost. Pur-ait is the official Betafence partner in Finland and supplies SECURIFOR products direct from the factory. The delivery time depends on the scope of the project and is confirmed in the quote. Request a site-specific quote and we will size the solution to your threat assessment and requirements.
Frequently asked questions
Betafence Securifor 3D, FAQ
What is the difference between SECURIFOR 3D and a standard panel fence?
Is SECURIFOR 3D certified for protection against forced entry?
How tall should a SECURIFOR 3D fence be for an energy facility?
How is SECURIFOR 3D installed?
How much does a SECURIFOR 3D fence cost?
Contact us
Right for your site?
Tell us about your site and requirements, and we will specify the right solution and send you a quote.