Perimeter security level 2
Sites that require significant resistance to forced entry and climbing. Public institutions, hospitals and some sites covered by the CER Directive.
Why Pur-ait for this level
Reinforced protection for critical sites
The reinforced 2D panel fence 8/6/8 and automated gates are suitable for the reinforced perimeter of public and critical sites
The anti-climb structure and reinforced locking prevent unauthorised intrusion, including by determined individuals
Suitable for some sites covered by the CER Directive, where the risk is significant but not the highest possible
Fence range
Reinforced fence
Tailored to each site. Tell us what you need and we will propose the right solution.
2D panel fence 8/6/8
Mesh sizes 50×200 and 35×200 mm. Reinforced three-wire panel, hot-dip galvanised and RAL painted. Anti-dig protection 50 cm.
Sites
Typical sites
Standards
Typical technical requirements
Level 2 sites require significant resistance to forced entry and climbing. The panel fence provides an anti-climb structure in which the narrower mesh makes it harder to find handholds and footholds.
Reinforced locks and gate structures slow down an intrusion attempt significantly. Anti-dig protection is available to a depth of 50 cm below ground, and a detector can be integrated into the fence.
The protection level of a site covered by the CER Directive is chosen on the basis of a risk assessment. Level 2 may be sufficient when physical security complements other protective measures such as CCTV and alarm systems.
Request a quote for a level 2 site
Tell us about your site and we will prepare a tailored solution proposal with a cost estimate.
Request a quote