Betafence Securifor 4D
SECURIFOR 4D is the most rigid high security mesh fence in the Betafence range, with alternating wires (1/1) forming a dense 12.7×76.2 mm matrix. Available LPS 1175 A1 certified for data centres, energy facilities and defence sites. Pur-ait supplies and installs throughout Finland.
Technical data
Specifications
Why choose this
Features
- Anti-climb with small mesh and alternating wires
- Anti-cut with very high cutting resistance
- Exceptionally rigid structure
- Available with LPS 1175 A1 rating
Suitability
Applications
Products in the same range
High Security
358 High Security Fence
Level 3 high security welded wire panel for critical infrastructure. Mesh 76.2×12.7 mm, wire diameter 4–6 mm, heights 2000–6000 mm. Galvanised steel with RAL powder coating.
Read more →
Betafence Securifor 2D
High security mesh fence. Mesh 12.7×76.2 mm, wire 4/6 mm, height 2000–6000 mm. LPS 1175 A1 certified.
Read more →
Betafence Securifor 3D
High security mesh fence. Mesh 12.7×76.2 mm, wire 4 mm, height 2000–3000 mm. Anti-climb and anti-cut.
Read more →
Betafence Securifor Defender
Galvanised and polyester-coated high security fence system. Mesh 76.2×12.7 mm, wire 4 mm. ASTM 2871-15 certified.
Read more →
Betafence Securifor Super 10
High security mesh fence with 10 mm vertical wire. Mesh 12.7×76.2 mm, height 2000–4000 mm. LPS 1175 B3 certified.
Read more →
Betafence Blokad Securifor Super 10
Multi-threat protection with anti-climb, anti-cut and vehicle impact protection in one fence. Height 2000–4000 mm. LPS 1175 B3 and M30 P1 certified.
Read more →
Palifor
Anti-climb palisade fence with a modular structure. Height 2400–3000 mm. LPS 1175 B3 and anti-climb certified.
Read more →
Blokade Palifor
Crash-rated palisade fence. Stops a 7200 kg vehicle at 48 km/h. Height 2400–3000 mm. ISO 22343 and LPS 1175 B3 certified.
Read more →
ISO 22343 Crash-Rated Gates
Pur-ait's crash-rated gate as a high-speed bi-folding gate or sliding gate for critical infrastructure. ISO 22343 certified. Stops a vehicle and is suitable for data centres, power plants and sites covered by the CER Directive.
Read more →SECURIFOR 4D for protecting critical infrastructure
SECURIFOR 4D is the most rigid model in the SECURIFOR range, designed for sites where intrusion delay is a measured quantity. Single alternating wires (1/1 structure) form a dense matrix that resists both climbing and mechanical penetration significantly better than conventional welded mesh fences. The 12.7×76.2 mm mesh prevents fingers and tools from being used for climbing, and the 4 mm wire diameter provides high cutting resistance against hand tools. Height options of 2000–3000 mm cover the requirements of typical security sites.
SECURIFOR 4D or 3D, when to choose the most rigid structure
SECURIFOR 4D differs from the 3D model in the rigidity of its structure. The alternating wire structure of the 4D makes the panel evenly rigid across its whole surface, whereas in the 3D the rigidity comes from a corrugated profile. In practice the 4D is chosen for sites where the threat analysis calls for the highest possible resistance without B-level certification. If the site requires a third-party LPS 1175 rating, the 4D is available with an A1 rating. Both models share the same 76.2×12.7 mm mesh, so their anti-climb properties are identical.
LPS 1175 A1 certification in practice
SECURIFOR 4D is available with an LPS 1175 A1 rating, which means tested resistance against hand tools for one minute. Class A covers mechanical tools such as screwdrivers, hammers and hand shears, not battery-powered cutters. The certification is relevant for sites where an insurer or a security standard requires documented performance but the threat assessment does not call for B-level protection. The certificate is granted for the complete system, including posts and fixings.
Typical applications
SECURIFOR 4D is suitable for sites where the primary task of the perimeter barrier is to delay and detect intrusion. Data centres benefit from the dense mesh structure because it prevents screening without offering places to hide. At energy facilities and electrical substations the rigidity of the 4D also withstands the stress caused by a vehicle impact. At defence and security sites the structure works as part of multi-layered protection, where the fence is combined with motion detectors and surveillance cameras.
SECURIFOR 4D price and quote request
The price of SECURIFOR 4D depends on the scope of the site, the height and the installation conditions. The LPS 1175 A1 certified version costs more than the basic panel, because the system also includes certified posts and fixings. Pur-ait is the official Betafence partner in Finland and supplies SECURIFOR 4D both as supply only and installed. Request a site-specific quote and we will size the solution to your threat assessment and security requirements.
Frequently asked questions
Betafence Securifor 4D, FAQ
What is the difference between SECURIFOR 4D and 3D?
What does LPS 1175 A1 certification mean for SECURIFOR 4D?
Which sites is SECURIFOR 4D best suited for?
What heights is SECURIFOR 4D available in?
How much does SECURIFOR 4D cost and how do I request a quote?
Contact us
Right for your site?
Tell us about your site and requirements, and we will specify the right solution and send you a quote.